2017 Wireless USB MPG Pendant Handwheel Mach3 for 3, 4 Axis CNC Milling Router For Sale

Packing Parts:

1 x 2017 Version Wireless Handle MPG

1 x Wireless USB Receiver

1 x CD (Mach3 software with license, instructions)

1 x English Manual

This wireless handwheel MPG is the newest2017 version, which is better than the last version. The wireless distance is40 meters. It can support 64 sets of equipment used simultaneously.

RFPerformance Description:

- The RF is Standard with 2.4G ISM ,the Txpower is 0DB and the RX sensitivity is -98DB.

- The RF has 64 channels,the channel gap is1Mhz

- The transmission distance is further than15 meters with no barrier

- The protocol Designed with highperformance;Low power consumption;Automatic learning ID Number;

- To jump frequency Adaptively when noised,which can work with 2.4G wireless Mic ,Wlan and Bluetooth etc. devices.

- 64 sets Wireless Handle work fine at the same time inone room ,with no-interference each other (old Version only work for 32 set atthe same time.)

- Support wireless handwheel function, 100PPR the manualpulse generator output.

- Display, real-time display of the machine the workpiececoordinates, mechanical coordinates.Coordinates X,Y and Z 3-axis with thescreen display.

DCDescription:

Name

Voltage

Current

Note

Wireless USB Receiver

4．5V—5．0V

Less than 50mA

Wireless Handle

1．5V—3．0V

Average Current

Less than 2mA

Use of time More than 2

months USE Two 2000MAH Battery

Note: WirelessHandle Need Two AA Battery;When the Low voltage indicator LED light;the batteryis completely;Proposed to replace the battery.

Application:

The WirelessManual Pulse Generator can are widely used in CNC milling machine, CNCmilling, CNC lathes, machining centers and other areas.

SchematicDiagram:

Note: In order tostabilize the signal, please keep the receiver installed in the outside of thechassis.( Do not install in the chassis.)

ButtonFeatures Description:

Band switch Function:

LCDDisplay Features Description