When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is a very popular high quality American style joystick. with 8-way smooth operation.
Each package has 1 x 2Pin oval type joystick
Features
(1) Used for all wood or metal controls.
(2) Excellent function and high quality control.
(3) Plastic base holder.
(4) Available round or square interface.
(5) Easy to use.
(6) The switch can be easily replaced.
- Can Not replace the different ball
- It's hight quality 5Pin 8-ways joystick model. The service life reaches 1 million clicks.Ne
- w interface mode. Reject the wrong interface.
- All the silver conduction point, contact sensitive; within the iron bar for the stainless steel;
- Applicable to the wooden shell and iron shell machine,
- The return of flexible, more wear-resistant; Iron base parallel cone; round gate
- 2.0 thickness of the electrolytic plate; dust washers; ball can not detachable, can not replace the different ball;
- Mounts into wood or metal control panelsI
- Microswitch reliability tested to 10,000,000 cycles
- Vertical attached microswitch with 0.187" (4.8mm) terminal
This joystick supports the 8-way and 4-way models. The default is round 8.
If you need to use the 4-way method, all you need is the small accessory # 5 (see Figure 5).
The NO interface is the signal / function pin to the 4.8 mm connection.
The COM interface is Ground Loop Each joystick contains 4 high quality microswitches.
The lifespan is 1,000,000 times.
Make sure to assemble the joystick in the numerical order in picture 5. It will lose its job.
ABOUT 
