Case 646 Compact Loader Garden Tractor Mower For Sale

1980 Case 646 Compact Loader Garden Tractor

The tractor is in good condition for its age and runs pretty well. Recently serviced. No leaks. The loader works well, has full down pressure and lifts high enough to load a pickup truck. The engine is a 16hp Onan V twin gas engine. It has a broken intake manifold bolt on one sidethat will need to be addressed. I have used the tractor as is without a problem. Includes a 44 inch mower deck that came with the tractor when I bought it. I have never used it, butI havestored itindoors andit appears to be in goodcondition. I do not have the belt for it. Also included is a full set of manuals, dealer brochures, rear tire chains, and 3 spray cans of Case Power Yellow paint.The tractor has the factory counter weight box and rear wheel weights. I replaced the rear tires and they are in good shape. I will also includethe trickle charger I installed to maintain the battery.I used it mainly to push snow, but my neighbor now has a tractor with a snowblower so I just don\'t need it anymore. I have the service/repair records for the time I have owned it. Please ask any questions before offerding. I am not an expert on this or any tractor but will answer the best I can. Sold \'AS IS\'. Pick Up Only - No Shipping - No Returns.

On Nov-01-14 at 08:15:26 PDT, seller added the following information:

In response to a question about the loader bucket I am adding the following information:

The edge of the loader bucket is reinforced on the bottom with an extra piece of steel - welded on all sides - and it also appears to have been welded every 3-4 inches the length of the bucket. I am guessing this is how it was originally made but I am not certain. From age and use the weld attaching the two pieces across the front has worn away. The \'wavy\' appearance in the picutre is from the 2 pieces being gradually forced apart between each pair of cross welds from continued use. The gaps fill up with material when in use. I power washed the bucket to take the pictures. The edge is not necessarily weak but is definitely worn and not sharp like a newer bucket would be.At the back of the bucket on the inside - another piece of steel was welded on all sides to reinforce it. Again I believe this is how it was originally made. On the right side only - the bottom weld has begun to separate and the reinforcing piece has rusted through. Behind it there is a small hole thru the side of the bucket and a larger hole at the back of the bucket. There is also a small hole in the reinforcing piece more toward the center.It can still be used as is but at some point it will need repair. I can send additional pictures if requested.I don\'t believe the bucket was modified or previously repaired in any way except for the addition of the hook on the top.

Please ask any additional questions you may have.

On Nov-03-14 at 00:57:05 PST, seller added the following information:

Here is the link for a video of the tractor. noticed today that thebottom of the bucket is rusted thru on the same side. Not visible from the front, back or side. Message me for a picture as I can\'t add more pics to the listing.