When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Description
High power and extraordinary FM sensitivity in an advanced circuitry AM/FM receiver.
How much AM/FM receiver can you get for a pleasantly modest investment? Try the Pioneer SX-950 on for size.
This distinctive package of plenty includes up-to-the-minute circuitry throughout its handsome construction, and then gives plenty of power to boot: continuous power output of 85 watts per channel min RMS at 8 ohms, from 20 Hertz to 20,000 Hertz with no more than 0.1% total harmonic distortion.
But big power is only one important attribute of this new receiver - you also get an FM front end that performs with outstanding stability and sensitivity, thanks to the use of a pair of dual gate MOS FETs in its RF amplifier and mixer, an advanced FM IF section that includes three 2-element ceramic filters and a large scale integrated circuit, plus a multiplex section for FM stereo broadcasts that uses the innovative and advanced phase-locked loop IC for excellent separation characteristics.
The result is a flawless kind of sound that is unmatched in tonal quality by any comparably-priced receiver now on the market, plus the radiant good looks of Pioneer design and human engineering. The SX-950 by Pioneer: Something extra everywhere.
Specifications
Tuning range: FM, MW
Power output: 85 watts per channel into 8Ω (stereo)
Frequency response: 15Hz to 40kHz
Total harmonic distortion: 0.1%
Damping factor: 25
Input sensitivity: 6.5mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)
Signal to noise ratio: 75dB (MM), 90dB (line)
Output: 150mV (line), 30mV (DIN), 1V (Pre out)
Speaker load impedance: 4Ω (minimum)
Semiconductors: 4 x FET, 4 x IC, 55 x transistors, 36 x diodes
Dimensions: 526.6 x 173 x fully functional, original
ABOUT 
