When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Please measure the thickness of your dial! Threaded shaft is 1/4" so your dial cannot be thicker than 1/8"
Repair or update your clock with this replacement kit. Or use this kit if you want to make a DIY clock you designed. MESSAGE ME FOR WHOLESALE PRICES. And please contact us if you have any problems with our kit/s before you leave a negative response, so we can resolve it. Please read the details carefully or ask questions if you need to, to ensure you get the correct kit for your project.
DETAILS: Motor
Motor model: Quartz OK888
Total shaft length is 1/2"
Threaded shaft is 1/4" so your dial cannot be thicker than 1/8"
Motor size: 2 2/16" x 2 2/16" x 5/8" case thickness
Threaded shaft diameter: 7mm/1/4". So make your hole in your dial 3/8" diameter
Motor type: Push-on-hands, does not require a nut to hold hands on the shaft
Requires one "AA" battery (not incl.)
Includes all mounting hardware; brass washer, and hex nut.
Continuous sweep motion, no stepping of gears, and ultra quiet.
We will replacemotorif itis defected! Just follow the instructions in the kit.
DETAILS: Hands
Metal hands that can be painted any color... use a primer then color coat
Hands can be cut down to a size using any household scissor
Minute hand: From the center hole: 5 3/4"
Hour hand: From the center hole: 3 3/4"
Second hand: From the center hole: 5"
Both the hour and minute hands have a circular hole for the motor's shaft, not oval or rectangular
Showcase by Seller SourceBook