When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Cut out for a bartop/tabletop arcade cabinet. Built to house Mame hardware, but you can install xbox, computer, Jamma, original arcade hardware, or whatever you like.
This is high quality wood, that was CNC routed to ensure quality. I included single and two player control board cutouts. This was designed to fit a 17\" monitor but I have heard of people using a 19\" without modification but I can notguaranteethat.
To build we recommend pre-drilling the holes first, then 1 1/4\" screws, you could also use some wood glue for added adhesion.
*The photos attached show a layout of the wood you will get, also shown is the bare wood assembled, and a example of a complete build.
*I also wrote on the wood some dimensions, they can vary slightly depending on your hardware and how you chose to mount the parts.
FAQ:NOTE: Cabinets are cut fresh, boxed, and shipped so they will require some sanding.Q: Does it come with slots for T molding?A: This kit does not.Q: Do you have instructions on building? Updated video in progress.A: Yes, Build Do I get a 1 player or 2 player board?A: You get one of each, everything you see in the full kit layoutQ: What are the measurements of the screen opening?A: 17 ¾ x 11 ¾ (Measurement of mine, you can mount the speaker board a little higher for more clearance)
Q: Can you make a custom control board? Or any other change?A: Sorry not at this time, unless you can buy at least 10
Q: What is the thickness of the wood?A: Marked 3/4\" but measures at .71\"Q: Can you ship out of the U.S.AA: Sorry not at this timeWe ship very fast and answer all questions as fast as possible. Check our reviews!
*If there are ANY issues, PLEASE message us before contacting . Resolution will be MUCH faster.Sign up to hear about our new products!
ABOUT 
